Develop good study habits
Just like the old saying goes, motivation is what gets you started, and habit is what keeps you going. A good habit, especially a good study habit, will have an inestimable effect in help you gain the success. The HPE7-A11 exam prep from our company will offer the help for you to develop your good study habits. If you buy and use our study materials, you will cultivate a good habit in study. More importantly, the good habits will help you find the scientific prop learning methods and promote you study efficiency, and then it will be conducive to helping you pass the HPE7-A11 exam in a short time. So hurry to buy the HPE7-A11 test guide from our company, you will benefit a lot from it.
Correct your mistake
It is known to us that the error correction is very important for these people who are preparing for the HPE7-A11 exam in the review stage. It is very useful and helpful for a lot of people to learn from their mistakes, because many people will make mistakes in the same way, and it is very bad for these people to improve their accuracy. If you want to correct your mistakes when you are preparing for the HPE7-A11 exam, the study materials from our company will be the best choice for you. Because our HPE7-A11 reference materials can help you correct your mistakes and keep after you to avoid the mistakes time and time again. We believe that if you buy the HPE7-A11 exam prep from our company, you will pass your exam in a relaxed state.
There are more and more people to try their best to pass the HPE7-A11 exam, including many college students, a lot of workers, and even many housewives and so on. These people who want to pass the HPE7-A11 exam have regard the exam as the only one chance to improve themselves and make enormous progress. So they hope that they can be devoting all of their time to preparing for the HPE7-A11 exam, but it is very obvious that a lot of people have not enough time to prepare for the important exam. Just like the old saying goes, the spirit is willing, but the flesh is week. We are glad to tell you that the HPE7-A11 exam prep from our company will help you solve your problem in a short time.
Make a learning plan
Subjects are required to enrich their learner profiles by regularly making plans and setting goals according to their own situation, monitoring and evaluating your study. Because it can help you prepare for the HPE7-A11 exam. If you want to succeed in your exam and get the related exam, you have to set a suitable study program. If you decide to buy the HPE7-A11 reference materials from our company, we will have special people to advise and support you. Our staff will also help you to devise a study plan to achieve your goal. We believe that if you purchase HPE7-A11 test guide from our company and take it seriously into consideration, you will gain a suitable study plan to help you to pass your exam in the shortest time.
HP HPE7-A11 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Analyze Requirements | 30% | - Create functional diagrams and workflows - Create preliminary bill of materials (BoM) - Design wired and wireless topology - Identify technologies to satisfy requirements |
| Topic 2: Discover Customer Requirements | 23% | - Collect and analyze current environment - Document assumptions - Interpret technical requirements - Identify stakeholders and roles |
| Topic 3: Architect the Solution | 30% | - Conduct technical and business review - Document implementation and migration guidelines - Write solution overview and executive brief - Finalize bill of materials - Write technical proposal document |
| Topic 4: Propose the Solution | 17% | - Contribute to solution proposal - Defend the solution |
HPE Network Campus Access Professional Architect Sample Questions:
1. Refer to the exhibit. Your client is deploying an HPE Aruba Networking solution where AOS-10 APs are configured in bridged mode and directly connected to AOS-CX access switches within a campus environment.
One of the top security priorities is to block user traffic to any destination that falls under the BrightCloud Web Classification of "Bot Nets". You've been asked to review and confirm the correct technical steps that will enable accurate identification, classification, and blocking of such traffic through Central managed policies and AOS-CX integration.
To block user access to the specified web destination(s) in this deployment model, which actions should be taken?
A) Add an (access rules) rule type "Blocked Page URL" and select "Bot Nets" collection action Deny to your AP's group.
B) Configure the switch to enforce auth-node client mode on AP edge ports with an unlimited max client setting'.
C) Add an (access rules) rule type "Access Control" Web Category and select "Bot Nets" action Deny to your APs group.
D) Add an (access rules) rule type "Access Control" Application Category and select "Bot Nets" action Deny to your APs group.
2. A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid quest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because internet connection is guaranteed.
Based on the best practices and customer requirements, what is the correct WLAN approach?
A) Instant OS6 deployment
B) OS8 campus deployment
C) OS10 AP only deployment
D) OS10 AP and gateway deployment
3. A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of 'No-Stair Inc." has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company is minimally engaged in their LAN refresh so the CTO of the company has shared the information below.
Current WLAN Infrastructure is based on the 802.11n "WIFI4Less" access-points series (both model 2013-INT (2.4 only internal antenna) and model 2019-EXT (dual-band external antenna only). These AP models are standalone without any centralized management. Last year 'No-Stair Inc.' ran a project called 'secure-it' ensuring that all needed network security was implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA.
Infrastructure to handle the increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs, with local breakout into different VLANs.
The CTO of 'No-Stair Inc.' understands the need for you to ask additional questions to deliver the design. The questions may be sent in written form and will be answered within two weeks.
What is a possible constraint?
A) Does the existing wired network support enough PoE for an upgraded Wi-Fi Network?
B) Does the existing AAA infrastructure support an upgraded Wi-Fi Network?
C) Does the existing WAN infrastructure support an upgraded Wi-Fi Network?
D) Does the existing core switch support an upgraded Wi-Fi Network?
4. A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed of 25Gbps over OM4 MM fiber. They would also like to keep the stacking cabling cost to a minimum.
Which switch series would most economically accomplish these requirements?
A) 6400 Switch Series
B) 6200F Switch Series
C) 6100 Switch Series
D) 6300F Switch Series
5. A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of 'No-Stair Inc." has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company is minimally engaged in their LAN refresh so the CTO of the company has shared the information below.
Current WLAN Infrastructure is based on the 802.11n "WIFI4Less" access-points series (both model 2013-INT (2.4 only internal antenna) and model 2019-EXT (dual-band external antenna only). These AP models are standalone without any centralized management. Last year 'No-Stair Inc.' ran a project called 'secure-it' ensuring that all needed network security was implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA.
Infrastructure to handle the increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs, with local breakout into different VLANs.
The CTO of 'No-Stair Inc.' understands the need for you to ask additional questions to deliver the design. The questions may be sent in written form and will be answered within two weeks.
What is a possible constraint?
A) Does the existing AAA infrastructure support an upgraded Wi-Fi Network?
B) Does the existing WAN infrastructure support an upgraded Wi-Fi Network?
C) Does the existing core switch support an upgraded WiFi Network?
D) Do the business-critical end devices being used support 5 or 6Ghz?
Solutions:
| Question # 1 Answer: C | Question # 2 Answer: C | Question # 3 Answer: D | Question # 4 Answer: D | Question # 5 Answer: C |




