100% Real & Accurate 350-501 Questions and Answers with Free and Fast Updates
Get Unlimited Access to 350-501 Certification Exam Cert Guide
Candidates seeking to sit for the Cisco 350-501 exam are required to have knowledge of essential networking concepts, network design principles, protocols, and technologies. Furthermore, candidates must have hands-on experience configuring and troubleshooting computer networks. Implementing and Operating Cisco Service Provider Network Core Technologies certification is recommended for individuals who have the knowledge and experience to work with complex networks used in the service provider domain.
Cisco 350-501 certification exam is a comprehensive exam that covers a wide range of topics. 350-501 exam is divided into several sections, each focusing on a specific technology. 350-501 exam includes questions on Routing protocols, such as OSPFv2, OSPFv3, IS-IS, and BGP. MPLS topics include MPLS LDP, MPLS VPNs, and MPLS TE. Quality of Service (QoS) topics include classification and marking, congestion management and avoidance, and traffic shaping and policing. Network automation topics include device programmability, automation tools, and APIs. Lastly, Security protocols include IPsec, SSL/TLS, and IKEv2.
NEW QUESTION # 10 
Refer to the exhibit. This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to enable gRPC.
- B. It is used to create a streaming subscription with a 600-second interval.
- C. It is used to set up configuration to poll network data.
- D. It is used to create a streaming subscription with a 60-Second interval.
Answer: D
Explanation:
Section: Automation and Assurance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/telemetry/b-telemetry-cg-asr9000-
62x/b-telemetry-config-guide-asr9000_chapter_01.html
NEW QUESTION # 11
Refer to the exhibit.
Which type of DDoS attack will be mitigated by this configuration?
- A. smurf attack
- B. SIP INVITE flood attacks
- C. teardrop attack
- D. SYN flood
Answer: A
NEW QUESTION # 12
Refer to the exhibit. An engineer configured BGP summarization on a customer's network.
Which route is advertised to BGP peers?
- A. 192.168.0.0/16
- B. 192168.0.5/30
- C. 192.0.0.0/16
- D. 192.168.1.0/24
Answer: A
NEW QUESTION # 13
A network architect plans to implement MPLS OAM to provide additional troubleshooting functionality for the NOC team. After analyzing the configuration on the MPLS P/PE nodes, the architect decides to revise the CoPP policies.
Which two actions ensure that the new solution is secure? (Choose two.)
- A. Allow the UDP protocol only.
- B. Allow port 3505 in the outbound direction only.
- C. Allow port 3503 in the inbound direction only.
- D. Allow the TCP and UDP protocols.
- E. Allow the ICMP protocol only.
Answer: A,C
NEW QUESTION # 14
Drag and drop the multicast concepts from the left onto the correct descnpt.ons on the right.
Answer:
Explanation:
NEW QUESTION # 15
What is the purpose of RSVP tear messages?
- A. to reuse router resources for other reservation requests
- B. to notify the tail-end router of resource unavailability on the transit router
- C. to confirm successful end-to-end resource allocation
- D. to inform the headend router of LSP issues
Answer: A
NEW QUESTION # 16
Drag and drop the LDP features from the left onto their usages on the right.
Answer:
Explanation:
NEW QUESTION # 17
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 18
Drag and Drop Question
Drag and drop the message types from the left onto the target field of the message originator on the right.
Answer:
Explanation:
NEW QUESTION # 19
Refer to the exhibit.
Refer to the exhibit. A network engineer must configure XR-PE1 for uninterruptible failover from active RP to the standby RP Neither peer devices CGW1 nor the network of ASN 64512 support restart extensions Which configuration must the engineer apply to XR PEI to complete tasks?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 20
Refer to the exhibit.
Which task completes the configuration?
- A. Specify the source interface in the neighbor statement.
- B. Specify the local-as value in the neighbor statement.
- C. Specify the activate neighbor 192.168.1.2 under the IPv4 address family.
- D. Specify the maximum number of prefixes that R1 receives from neighbor 192.168.1.2.
Answer: C
NEW QUESTION # 21
Whtch two routing protocols support Cisco MPLS TE tunnels? (Choose two.)
- A. BGP
- B. IS-IS
- C. RIP
- D. EIGRP
- E. OSPF
Answer: B,E
NEW QUESTION # 22
Which core component of MDT describes the data that an MDT-capable device streams to a collector?
- A. encoder
- B. transport protocol
- C. sensor path
- D. subscription
Answer: C
NEW QUESTION # 23
Refer to the exhibit A user is performing QoS marking on internet traffic and sending it with IPv4 and IPv6 headers on the provider edge device PE1. IPv4 traffic is classified with DSCP 4 and IPv6 traffic is classified with DSCP 6. Which action must the engineer take to begin implementing a QoS configuration on PE1 for the IPv6 traffic?
- A. Create an access list that includes any IPv6 traffic and apply it to CM-20.
- B. Create access list IPv6-filter and remove DSCP value 4 and 6 in class maps CM-10 and CM-20.
- C. Create access list IPv6-match and configure match ip dscp 4 and match ip dscp 6 in class maps CM-10 and CM-20.
- D. Configure match ip dscp 4 in class map CM-10 and match ip dscp 6 in class map CM-20.
Answer: A
NEW QUESTION # 24
Refer to the exhibit. Which information is provided for traceback analysis when this configuration is applied?
- A. source interface
- B. BGP version
- C. packet size distribution
- D. IP sub flow cache
Answer: D
NEW QUESTION # 25 
Refer to the exhibit. Assume all other configurations are correct and the network is otherwise operating normally.
Which conclusion can you draw about the neighbor relationship between routers R1 and R2?
- A. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family.
- B. The neighbor relationship is down because R1 believes R2 is in AS 65012.
- C. The neighbor is down because the local-as value for R2 is missing in the R1 neighbor statement.
- D. The neighbor relationship is up.
Answer: B
Explanation:
Section: Networking
NEW QUESTION # 26
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 27
Refer to the exhibit.
Which task completes the configuration?
- A. Specify the source interface in the neighbor statement.
- B. Specify the local-as value in the neighbor statement.
- C. Specify the activate neighbor 192.168.1.2 under the IPv4 address family.
- D. Specify the maximum number of prefixes that R1 receives from neighbor 192.168.1.2.
Answer: C
NEW QUESTION # 28
Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements:
Session protection is provided for core loopback IP addresses only.
The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails.
Which configuration must the team implement on PE-XR1?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION # 29
......
Reliable Study Materials for 350-501 Exam Success For Sure: https://examsdocs.dumpsquestion.com/350-501-exam-dumps-collection.html