Free Mar-2023 HPE2-T37 Certification Sample Questions certification Exam [Q26-Q49]

Free Mar-2023 HPE2-T37 Certification Sample Questions certification Exam

Certification Topics of HPE2-T37 Exam PDF Recently Updated Questions

NEW QUESTION 26
Which statement about a server profile for an Apollo system is true?

A. UEFI optimized is the only available boot mode
B. Enclosure Group Is automatically selected
C. Fibre Channel connections can be defined
D. Virtual WWNs and MAC addresses can be defined

Answer: C

NEW QUESTION 27
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?

A. The sFlow option must be enabled and configured.
B. The Compute Module profile must have exactly two connections defined.
C. Both FlexNlCs must be connected to the same network.
D. An upgrade license must be purchased and deployed.

Answer: A

NEW QUESTION 28
You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.
What is a possible reason?

A. The server is powered off
B. The server is powered on
C. The server does not have an HPE OneView license applied
D. You tried to add additional connection above the limit

Answer: B

NEW QUESTION 29
A customer wants to estimate the cost of the licenses required to manage HPE Synergy and some external components When component includes an HPE OneView license for management?

A. Storage Array
B. Master Module
C. Logical Enclosure
D. Compute Module

Answer: D

NEW QUESTION 30
Which statement about an HPE OneView server profile is true?

A. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
B. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
C. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
D. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.

Answer: C

NEW QUESTION 31
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?

A. Set a specific workload profile using IL0 interface for each individual server.
B. Set a specific workload profile within server profile template and update all profiles.
C. Set a specific workload profile within Logical Interconnect Group and update all servers.
D. Set a specific workload profile for all managed servers as an HPE OneView global setting.

Answer: B

NEW QUESTION 32
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?

A. Create a support dump for the appliance and for all managed logical interconnects
B. Disable HPE Remote Support at toe HPE OneView appliance level
C. Put all servers managed through HPE OneView to maintenance state
D. Run the Update Readiness checker tool to evaluate HPE OneView health status

Answer: D

NEW QUESTION 33
Which statement about the presented storage pools is true?

A. HPE OneView can be used to configure replication only between managed storage pools
B. Storage pools in discovered state can be removed from HPE OneView.
C. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
D. All storage pools in managed state have a valid HPE OneView license applied

Answer: C

NEW QUESTION 34
Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?

A. Changes to the server profile were implemented directly on the server profile.
B. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
C. HPE OneView was restored from a backup that created inconsistency with the server profile template.
D. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

Answer: A

NEW QUESTION 35
Click the option that will allow you to update the firmware of master and satellite modules.

Answer:

Explanation:

NEW QUESTION 36
Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?

A. Auto-zoning functionality will not work until SANs are associated with networks.
B. Snapshot functionality will be limited only to the volumes not using these SANs.
C. Volume presentation through server profile will work with the discovered state.
D. Volume provisioning will only work for arrays that ate accessible through these SANs.

Answer: C

NEW QUESTION 37
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)

A. local storage and BIOS settings.
B. partition layout for servers running Linux.
C. NIC teaming setup at OS level.
D. IL0 IPv4 or IPv6 address.
E. network and storage connectivity.

Answer: A,E

NEW QUESTION 38
Which statement about a server profile for an Apollo system is true?

A. Virtual WWNs and MAC addresses can be defined
B. UEFI optimized is the only available boot mode
C. Enclosure Group Is automatically selected
D. Fibre Channel connections can be defined

Answer: A

NEW QUESTION 39
What is the best practice when deploying an HPE OneView appliance?

A. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
B. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
D. Deploy two HPE OneView appliances and configure them in HA mode.

Answer: A

NEW QUESTION 40
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

A. As a virtual appliance running on the supported hypervisor.
B. As an application running on the server with CentOS Linux system
C. As a physical appliance based on HPE ProLiant 360 Gen 10.
D. As an application running on the server with Windows system.

Answer: A

NEW QUESTION 41
Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

A. The other networks are configured with a purpose other than General or Management.
B. The other networks are not added to the Logical Interconnect Group configuration.
C. The other networks have Private Network' selected, which hides them from Compute Modules.
D. The other networks are not configured with the required Smart Link parameter.

Answer: B

NEW QUESTION 42
Which action is allowed on storage pools managed by HPE OneView?

A. Changing storage pool capacity
B. Setting storage pool replication
C. Volume provisioning
D. Changing storage pool RAID level

Answer: C

NEW QUESTION 43
Refer to the exhibit.

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?

A. The firmware repository is not defined within firmware compliance report.
B. The firmware repository service must be restarted using maintenance connection.
C. The refresh procedure must be performed on each logical enclosure to refresh firmware.
D. All of the components are up to date and compliant with firmware baseline.

Answer: B

NEW QUESTION 44
Which HPE components can be managed using HPE Composer? (select two.)

A. HPE B-series SN6600B Fibre Channel Switch
B. HPE Superdome Flex 280
C. HPE MSA 2062 Storage Array
D. HPE Synergy Virtual Connect SE 32Gb FC Module
E. HPE Synergy 480 Compute Modules

Answer: A,D

NEW QUESTION 45
Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?

A. Auto-zoning functionality will not work until SANs are associated with networks.
B. Snapshot functionality will be limited only to the volumes not using these SANs.
C. Volume presentation through server profile will work with the discovered state.
D. Volume provisioning will only work for arrays that ate accessible through these SANs.

Answer: C

NEW QUESTION 46
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?

A. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
B. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
C. HPE OneView Global Dashboard allows server profile replication and change management.
D. PowerShell Library for HPE OneView allows scripted environment modification.

Answer: B

NEW QUESTION 47
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.