Pass VMware 5V0-42.21 exam questions - convert Test Engine to PDF
Pass Your 5V0-42.21 Exam Easily - Real 5V0-42.21 Practice Dump Updated Jan 16, 2022
VMware 5V0-42.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 11
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?
- A. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
- B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
- C. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
- D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings
Answer: C
NEW QUESTION 12
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- B. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
- C. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
- D. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
Answer: B
NEW QUESTION 13
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - B. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - C. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- D. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
Answer: D
NEW QUESTION 14
A customer would like to use a VNF firewall on the VMware SU-WAN 600 series Edge.
Where do the Edge firewallrules of the VNF apply?
- A. Overlay
- B. Underlay
- C. WAN side
- D. LAN side
Answer: C
NEW QUESTION 15
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?
- A. Regional Gateway
- B. Super Gateway
- C. Alternate Gateway
- D. Primary Gateway
Answer: D
NEW QUESTION 16
Which statement is true about the VMware SD-WAN Gateway roles and assignments?
- A. If the Primary Gateway goes down. Cloud internet traffic would failover to Secondary gateway automatically
- B. The Primarily and Secondary Gateways share the load fur both internet traffic and VPN traffic
- C. The SD-WAN Orchestrator assigns the Gateways to the Edge automatically when it comes up based Oil (lie location of the Edge Branch-to-branch will choose the right Gateway automatically
- D. Primary Gateway cannot be used as Super gateway for Edge-to-Edge communication, even it all the Edges have a common Primary gateway
Answer: D
NEW QUESTION 17
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
- B. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
- C. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
- D. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
Answer: C
NEW QUESTION 18
What are three key benefits of VMware SD-WAN? (Choose three )
- A. Provision Edges in minutes
- B. Reduce the burden on MPLS
- C. Remove requirement of Edge devices
- D. Layer 2 VPNs between sites
- E. Automated configuration of cloud resources
- F. Gain visibility across any link
Answer: B,C,E
NEW QUESTION 19
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
- A. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
- B. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.
- C. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
- D. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
Answer: B
NEW QUESTION 20
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?
- A. SFP1
- B. GE4
- C. Any port may be chosen.
- D. GE1
Answer: A
NEW QUESTION 21
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. Password configured in cloud_init
- B. adnim
- C. velocloud
- D. No password required
Answer: A
NEW QUESTION 22
An administrator is looking for a cost effective model of hardware-based Edge for some branch offices. The device must be mounted in rack cabinet, and to meet performance requirements and projected growth, the appliance must support up to 2 Gpbs bandwidth.
Which Edge modelsatisfies these requirements?
- A. Edge 3400
- B. Edge 510
- C. Edge 540
- D. Edge 620
Answer: C
NEW QUESTION 23
Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology.
Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B?
- A. Branch to Non VMware SU-WAN Site
- B. Branch to CASH
- C. Site-to-Site VPN
- D. Branch to Branch VPN
Answer: B
NEW QUESTION 24
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Business Policy
- B. Firewall
- C. Segments
- D. VLANs
Answer: C
NEW QUESTION 25
An administrator has been receiving complaints about their SaaS business collaboration apps.
Which network service should the administrator use to resolve the issue?
- A. Backhaul
- B. Multi-Path
- C. Direct
- D. CoS mapping
Answer: C
NEW QUESTION 26
A customer is using VMware vSphere in their data center. An administrator is asked to deploy SD-WAN Edges for a Proof of Concept as soon as possible.
Which deployment option is the roost cost and time effective?
- A. Deploy a virtual appliance on ESXi
- B. Deploy a virtual appliance in AWS
- C. Deploy a virtual appliance on KVM
- D. Purchase bare metal Edge
Answer: C
NEW QUESTION 27
A customer is using hypervisor to install VMware Partner Gateways.
Which two hypervisors may be used? (Choose two.)
- A. Kubermetes
- B. ESXi
- C. XenServer
- D. Hyper-V
- E. KVM
Answer: D,E
NEW QUESTION 28
A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain bandwidth.
Which feature should be used?
- A. Change the application priority to low.
- B. Modify the SD WAN Traffic Class and Weight Mapping
- C. Enable the rate limit under a new custom Business Policy Rule.
- D. Enable the SD-WAN Overlay Rate-Limit.
Answer: A
NEW QUESTION 29
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. One VCE cluster can be formed with both virtual and hardware at the same lime
- B. VCE cluster members should have unique IP addresses on its WAN interfaces
- C. A VCE cluster requires one dedicated interface for HA sync
- D. VCF clusters member sync flow tables between themselves.
Answer: D
NEW QUESTION 30
......
5V0-42.21 Real Exam Questions and Answers FREE: https://examsdocs.dumpsquestion.com/5V0-42.21-exam-dumps-collection.html